Tag: clish

Posted on

Checkpoint: Troubleshooting VRRP on Nokia Firewalls

Troubleshooting VRRP on Nokia Checkpoint Firewalls

The purpose of this article is to help in troubleshooting VRRP related issues on NOkia Checkpoint Firewalls. One of the most common problems faced in Nokia VRRP Implementations is that interfaces on active and standby firewalls go into the master master state. THe main reason for this is because the individual vrids of the master and backup firewall are not able to see the vrrp multicast requests of each other.

 

The first step is to check the vrrp state of the interfaces. THis is how you can check that:

 

PrimaryFW-A[admin]# iclid
PrimaryFW-A> sh vrrp

 

VRRP State
Flags: On
6 interface enabled
6 virtual routers configured
0 in Init state
0 in Backup state
6 in Master state
PrimaryFW-A>
PrimaryFW-A> exit

 

Bye.
PrimaryFW-A[admin]#

 

SecondaryFW-B[admin]# iclid
SecondaryFW-B> sh vrrp

 

VRRP State
Flags: On
6 interface enabled
6 virtual routers configured
0 in Init state
4 in Backup state
2 in Master state
SecondaryFW-B>
SecondaryFW-B> exit

 

Bye.
SecondaryFW-B[admin]#

 

In the example shown you see that 2 interfaces each from both firewalls are in the Master state.

 

The next step should involve running tcpdumps to see if the vrrp multicasts are reaching the particular interface.

 

As the first troubleshooting measure, put a tcpdump on the problematic interface of the master and backup firewalls. If you want to know what the problematic interface is, “echo sh vrrp int | iclid” should give you the answer. It is that interface on the backup firewall which would be in a Master state.

 

PrimaryFW-A[admin]# tcpdump -i eth-s4p2c0 proto vrrp
tcpdump: listening on eth-s4p2c0
00:46:11.379961 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
00:46:12.399982 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
00:46:13.479985 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
00:46:14.560007 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]

 

When you put a tcpdump on the Primary Firewall, you see that the vrrp multicast request is leaving the interface.

 

Next put the tcpdump on the secondary firewall.

 

SecondaryFW-B[admin]# tcpdump -i eth-s4p2c0 proto vrrp
tcpdump: listening on eth-s4p2c0
00:19:38.507294 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]
00:19:39.527316 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]
00:19:40.607328 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]
00:19:41.687351 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]
00:19:42.707364 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]

 

Now you can see that the interface on both the primary and the secondary firewalls are broadcasting vrrp multicasts. This is because the vrrp multicasts are not reaching the firewalls interfaces. This means there is a communication breakdown which can be possibly caused by network issues.

 

Once the network issue is resolved, communication would be possible and the interface with the lower priority will go as the secondary or backup state.

 

Now let us discuss another scenario where there is a problem with the firewall interfaces in Master Master state.

 

Again put a tcpdump on both the interfaces in question:

 

PrimaryFW-A[admin]# tcpdump -i eth-s4p2c0 proto vrrp
tcpdump: listening on eth-s4p2c0
00:46:11.206994 I 10.10.10.1 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 95 [tos 0xc0]
00:46:11.379961 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
00:46:12.286990 I 10.10.10.1 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 95 [tos 0xc0]
00:46:12.399982 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
00:46:13.307014 I 10.10.10.1 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 95 [tos 0xc0]
00:46:13.479985 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
00:46:14.387098 I 10.10.10.1 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 95 [tos 0xc0]
00:46:14.560007 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
00:46:15.467064 I 10.10.10.1 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 95 [tos 0xc0]
00:46:15.580010 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]

 

SecondaryFW-B[admin]# tcpdump -i eth-s4p2c0 proto vrrp
tcpdump: listening on eth-s4p2c0
00:19:38.507294 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]
00:19:38.630075 I 10.10.10.2 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 100 [tos 0xc0]
00:19:39.527316 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]
00:19:39.710131 I 10.10.10.2 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 100 [tos 0xc0]
00:19:40.607328 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]
00:19:40.790142 I 10.10.10.2 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 100 [tos 0xc0]
00:19:41.687351 O 192.168.1.2 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 95 [tos 0xc0]
00:19:41.810150 I 10.10.10.2 > 224.0.0.18: VRRPv2-adver 20: vrid 103 pri 100 [tos 0xc0]

 

In the above example look at the vrid numbers of the incoming and outgoing packets. From the vrids you see that that the vrids donot match. This is an indication that the cabling is not correct. The cables going to vrid 102 and 103 are not connected correctly and they need to be swapped to fix this issue.

 

Swap the cables and the issue will be resolved. The firewall with the higher priority will go into the Master state.

 

A properly functioning firewall will be like this:

 

PrimaryFW-A[admin]# iclid
PrimaryFW-A> sh vrrp

 

VRRP State
Flags: On
6 interface enabled
6 virtual routers configured
0 in Init state
0 in Backup state
6 in Master state
PrimaryFW-A> exit

 

Bye.
PrimaryFW-A[admin]#

 

SecondaryFW-B[admin]# iclid
SecondaryFW-B> sh vrrp

 

VRRP State
Flags: On
6 interface enabled
6 virtual routers configured
0 in Init state
6 in Backup state
0 in Master state
SecondaryFW-B> exit

 

Bye.
SecondaryFW-B[admin]#

 

If you were to tcpdump the healthy interface, this is how it would look:

 

PrimaryFW-A[admin]# tcpdump -i eth-s4p2c0 proto vrrp
tcpdump: listening on eth-s4p2c0
18:25:44.015711 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:25:45.095726 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:25:46.175751 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:25:47.195770 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:25:48.275819 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:25:49.355812 O 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
^C
97 packets received by filter
0 packets dropped by kernel
PrimaryFW-A[admin]#

 

SecondaryFW-B[admin]# tcpdump -i eth-s4p2c0 proto vrrp
tcpdump: listening on eth-s4p2c0
18:26:07.415446 I 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:26:08.495451 I 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:26:09.515480 I 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:26:10.595486 I 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:26:11.675485 I 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:26:12.695522 I 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
18:26:13.775590 I 192.168.1.1 > 224.0.0.18: VRRPv2-adver 20: vrid 102 pri 100 [tos 0xc0]
^C
14 packets received by filter
0 packets dropped by kernel
SecondaryFW-B[admin]#

Credit to Secmanager

 

Related posts:

Posted on

Checkpoint: Bypass The First Time Configuration Wizard on Appliances

I had cause to revert a CheckPoint appliance to its factory image today of R75.40. In itself, no biggie – open a console connection, Ctrl-S to access the setup menu and choose factory default image. Log in to the webUI and complete the first time wizard.

Having encountered the Firefox “xslProcessor.transformDocument is not a function” error – still a known issue in R75.40 –  I logged in with IE 10. Unfortunately this went only as far as allowing me to log in and the actual wizard interface never appeared – this is an intermittent issue for me and seems to depend on the current price of fish.

Anyways .. the easiest thing to do (imho) is to:

Bypass The First Time Configuration Wizard

The following will prevent the the “First Time Configuration Wizard” from starting automatically.

Secure Platform:

  • Login to Expert mode and create the following file:

[expert@fw]# touch /opt/spwm/conf/wizard_accepted

  • Reboot the appliance
  • You now need to run sysconfig and go through all the steps of “Product Configuration” – only then can you access the “Product Installation” – obviously necessary for a working appliance!

Gaia:

The process is similair on Gaia – log in and create the file.

[expert@fw]# touch /etc/.wizard_accepted

There is no reboot required for Gaia

** Note: Login credentials remain unchanged **

Running the First Time Configuration Wizard again

Easy – delete the files which were created above!

 

Related posts:

Posted on

Checkpoint: Nokia Clish Command Reference

Some clish commands that are incredibly handy but not worth committing to memory as they’re only used every 4th blue moon .. Thanks secmanager.org.

—setting default gateway
set static-route default nexthop gateway address 192.168.29.2 priority 1 on

—adding static routes
set static-route 172.23.124.150/32 nexthop gateway address 192.168.29.50 on

—Add proxy arp
add arpproxy address 192.168.29.56 macaddress 0:a0:8e:7d:13:d0
add arpproxy address 192.168.29.57 macaddress 0:a0:8e:7d:13:d0

—Add an interface
set interface eth1 speed 100M duplex full active on
add interface eth1c0 address 192.168.29.54/24 enable

—VRRP

set vrrp accept-connections on
set vrrp coldstart-delay 60

set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth2c0 on
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth2c0 priority-delta 10
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth3c0 on
set vrrp interface eth1c0 monitored-circuit vrid 54 monitored-interface eth3c0 priority-delta 10
set vrrp interface eth1c0 monitored-circuit vrid 54 priority 100
set vrrp interface eth1c0 monitored-circuit vrid 54 hello-interval 1
set vrrp interface eth1c0 monitored-circuit vrid 54 vmac-mode default-vmac
set vrrp interface eth1c0 monitored-circuit vrid 54 backup-address 192.168.29.1 on

—Set ntp servers

add ntp server 10.1.1.2 version 3 prefer yes
add ntp server 10.1.1.1 version 3 prefer yes

—Setting Time zone

set date timezone-city “Greenwich (GMT)”

—Add hostname

set hostname testbox

—Add Host address assignments

add host name testbox ipv4 192.168.29.54

Related posts:

Exit mobile version
%%footer%%